ProLiant Servers (ML,DL,SL)
1757081 Members
2483 Online
108858 Solutions
New Discussion юеВ

Re: HP DL560 Compaq Event LOG error

 
NOCula
New Member

HP DL560 Compaq Event LOG error

Hello all,

Does anyone know what this error is:

The system encountered a Non-Maskable Interrupt (NMI) prior to this boot. The NMI source was: Intermodule Bus Error, error code 0x0.

I get this upon startup each time the machine reboots unexpectedly...
2 REPLIES 2
Tarek Kawach
Honored Contributor

Re: HP DL560 Compaq Event LOG error

Hi Nocula:

This is a bad memory dimm, or PCI card on the system board; or even system board issue.

Make sure all Firmware is uptodate and clear the error in the logs or bios; and minimize the server hardawre by removing all pci cards and trying one at a time.

Most likely the server firmware will take care of this problem. Make sure you are not using 3rd party memory.

Check the IMLV for errors; under HP system tools.

here it is.
Systems ROMPaq Firmware Upgrade Diskette for ProLiant DL560 (P30) Server version 4.05 P30-06/23/2004 (16 Jul 04) http://h18023.www1.hp.com/support/files/server/us/download/21242.html


Best regards,

Tarek.
Hey, look a light at the end of the tunnel.
Tarek Kawach
Honored Contributor

Re: HP DL560 Compaq Event LOG error

Found this link on HP site might explain it better.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_CN0416W
Hey, look a light at the end of the tunnel.