HP Power Regulator for ProLiant

[Rob Leadbeater]

Hi,

I've just been to a HP roadshow where I heard about the Power Regulator features which are now accessible through the new version of iLO.

So on a DL380G4, I just installed iLO 1.70, and attempted to enable Dynamic Power Savings Mode.

However the iLO page returns:
"A Power Savings mode has been enabled, but this feature is not supported by the host system."

According to the page here:
http://h18013.www1.hp.com/products/servers/management/ilo/power-regulator.html

the DL380G4 is supported.
I've checked the relevant BIOS revision and that is correct.

Any ideas why this doesn't work ? My computer room is currently running very warm and anything that I can do to reduce heat output would be beneficial !

Cheers,

Rob