ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Proliant DL360 G3 - No video output at boot

 
mastrboy
Occasional Visitor

HP Proliant DL360 G3 - No video output at boot

HP Proliant DL360 G3 - No video output at boot,

- Tested with multiple monitors
- Tried to reset bios with the maintenance switch (nr 6)
- The RiLOE card is integrated in the mainboard, therefor there is only 1video output port.
- I can't access RiLOE at all either, even tried to setup a linux bridge with tcpdump -vv to see if any traffic came out of the RiLOE card, but nothing.
2 REPLIES
KarloChacon
Honored Contributor

Re: HP Proliant DL360 G3 - No video output at boot

well, RILOE has its own video card

1. remove any attached device. Like UBS Key, Floppy, CD-ROM, Tape Drive and so on.

2. remove no hp components. PCI Cards.

3. reseat components. CPU/PPM, DIMMS, PCI Cards, Power Supply

4. swap components. CPU/PPM to another slot. PS to another bay.

5. minimum configuration
- no HDD
- just 1 or two DIMMS depends on the server model.
- 1 PSU
- No PCI Cards

6. try removing all memory DIMMS if there a beep code, if a System issue change it

if you try all these steps the next step is change the SB.
Didn't your momma teach you to say thanks!
mastrboy
Occasional Visitor

Re: HP Proliant DL360 G3 - No video output at boot

non of these suggestions worked :( guess we have to check the price for the SB, thanks anyway