ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Proliant ML350 G4 will not boot

SOLVED
Go to solution
PaddyOG
Occasional Visitor

HP Proliant ML350 G4 will not boot

I have a HP Proliant ML350 G4 that will not boot. It will not display anything to screen.
There are no beep codes or red lights. I have re-seated memory, processor,
array controller, disks etc and it has made no difference. When I turn it on
the fans run at full speed all the time. The disks go through there spool up
but nothing happens. If I remove the process and boot it I get the same
reaction, no error beep codes or red lights. I have tried putting in a second
graphics card to see if anything is displayed but still nothing. It’s hard fix
something when there’s no errors to go by.

4 REPLIES
Leslie van der Hoek
Valued Contributor
Solution

Re: HP Proliant ML350 G4 will not boot

get system off power,

get battery out of systemboard, pull all the memory and put 1 back,

look on the inside of the lid, on the drawing there is a system maintenance switch, switch number 6 on,put battery back,power back on and see what happens after a couple of minutes on the screen

How to Say Thank You? Just click the KUDOS Star!
PaddyOG
Occasional Visitor

Re: HP Proliant ML350 G4 will not boot

Thank you very much, that did the trick. One of the memory
modules must be faulty. Thanks.

IMSC
Occasional Visitor

Re: HP Proliant ML350 G4 will not boot

Good afternoon:

We have a G4p that will not boot, even after this switch 6 turned on.

 

What do you suggest us to do?

Geekman
Occasional Visitor

Re: HP Proliant ML350 G4p will not boot

Hi there any response to the above ? i have a same server , that will not boot when booting up on 6 as well ??