HPE Community
ProLiant Servers (ML,DL,SL)
1756973 Members
2189 Online
108857 Solutions
New Discussion

Heat issue with Compaq Array Controller

 
Ayman Altounji
Valued Contributor

‎02-06-2001 04:00 PM

‎02-06-2001 04:00 PM

Heat issue with Compaq Array Controller

Since the installation of our DL380 following mesages appear from time to time:
CPQARRAY: The Compaq Array Controller in slot 0 reports the storage enclosure on port 2 is nearing the preset temperature limit. Please take corrective action.

and 2 seconds later

CPQARRAY: The Compaq Array Controller in slot = reports the storage enclosure on port 2 has returned to an acceptable temperature level.

What can I do to fix the problem and to have this messages out of my problem list.
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎02-07-2001 04:00 PM

‎02-07-2001 04:00 PM

Re: Heat issue with Compaq Array Controller

Try upgrading the firmware on the Smart Controller .....

Options ROMPaq For Array Controllers
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.