ProLiant Servers (ML,DL,SL)
1827593 Members
2657 Online
109965 Solutions
New Discussion

Re: Hp Proliant ML110 G7 Power LED not functioning Server would not power up.

 
GeekChris
New Member

Hp Proliant ML110 G7 Power LED not functioning Server would not power up.

I have a Hp Proliant ML110 G7 Server with Windows Server 2012 installed on it.

This server machine would not boot up.
When you plug the server to the power source, all the fans would immediately start working (the Machine would be humming as though it were working) but the Power LED is not lit.

I checked the power LED status on the system case and it indicates that when the power LED is amber, the Server is on standby but when it is not lit, it implies power failure. In my own case, the power LED is completely off. The only LED indicator still functioning is the blue light (the UID LED) in front as well as behind the machine.

I will appreciate any useful information to get my machine up and running again.

1 REPLY 1
Kashyap02
HPE Pro

Re: Hp Proliant ML110 G7 Power LED not functioning Server would not power up.

Hello,

Does the fans spin contineously when you plug to power source even the power button LED is off?

What happens when you push the power button? any LEDs?

Have you tried to power cycle the server once?

I am a HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo