ILO reset

[Atta]

Hp proLiant DL380 Gen8 server running with Hyper-v, how to reset iLo/configure Online, with out restart server.

[Ali]

Hi,

iLO reset does not require reboot as it has its own processor.

Resetting iLO through the web interface:

If iLO is slow to respond, you might need to perform a reset.
1. Navigate to the Information→Diagnostics page in the iLO web interface.
2. Click Reset.
Clicking Reset iLO does not make any configuration changes, but it ends any active connections to iLO and completes any firmware updates in progress. You must have the Configure iLO Settings privilege to reset iLO using this method.

for more information on iLO reset, refer to iLO4 user guide:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03334051/c03334051.pdf

hope this helps,

how to say thanks... Click on STAR KUDOS!

Cheers!

Ali