Install Kerio Control to hp proliant dl20 gen9

[dasturchiuz]

someone help me????

[FabioC1 · Accepted solution]

Try change boot orther to Legacy BIOs mode and enable SATA AHCI of B140i controler

To select a Boot Mode:From the System Utilities screen, select System

1.The server starts up and the HPE ProLiant POST screen appears within a few minutes.

Press the F9 key in the ProLiant POST screen. The System Utilities screen appears.

Configuration → BIOS/Platform Configuration

1.(RBSU) → Boot Options → Boot Mode and press the Enter key.
Select a setting and press the Enter key:

2. chose the Legacy BIOS mode.

Press the F10 key to save your selection.

3.Reboot the server for the change to take effect

To enable the B140i controller:

Reboot the server.

1.The server starts up and the HPE ProLiant POST screen appears within a few minutes.

Press the F9 key in the ProLiant POST screen. The System Utilities screen appears.

2.From the System Utilities screen, select System Configuration → BIOS/Platform Configuration

3. (RBSU) → System Options → SATA Controller Options → Embedded SATA Configuration →

Enable HPE Dynamic Smart Array RAID Support, and then press the Enter ke

4.Select a setting and press Enter:

5.Enable SATA AHCI Support

Press the F10 key to save your selection.
=============================================

Try install Your software