ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

QuickFind Diagnostic Display LEDs

SOLVED
Go to solution
Pradip Chakrabarti
Frequent Advisor

QuickFind Diagnostic Display LEDs

Hi,

Can anyone share the QuickFind Diagnostic Display LEDs "Port 85 Codes" and their descriptions of DL580G3 Server

Thanks
5 REPLIES
sandeep_raman
Honored Contributor

Re: QuickFind Diagnostic Display LEDs

Pradip Chakrabarti
Frequent Advisor

Re: QuickFind Diagnostic Display LEDs

Hi Sandeep,

Thanks, one more question

How to ensure that the port 84/85 switch is set to display port 85 codes?

Best Regards
Pradip
sandeep_raman
Honored Contributor
Solution

Re: QuickFind Diagnostic Display LEDs

Setting the switch to view port 85 codes

To change the display on the QuickFind diagnostic panel to view port 84 and 85 codes

("Troubleshooting the system using port 85 codes" on page 64):
1. Extend the server from the rack ("Extending the server from the rack" on page 15).
2. Remove the access panel ("Removing the access panel" on page 17).
3. Locate the switch on the media board ("System board components" on page 76).
4. Set the switch to the P85 position to view port 85 codes.

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00432509/c00432509.pdf
Pg 80 of 104

SRH
Pradip Chakrabarti
Frequent Advisor

Re: QuickFind Diagnostic Display LEDs

Thanks Sandeep
Pradip Chakrabarti
Frequent Advisor

Re: QuickFind Diagnostic Display LEDs

Found exact answer. Thanks again.

Pradip Chakrabarti