Ready for recovery

[Arto Saraniva]

We had temp problems with one of the DL380 G3 scsi disk. Now all disks seems ok, but still the recovery will not start. Have we missed something?

=>
Smart Array 5i in Slot 0
array A
physicaldrive 2:0 (port 2:id 0 , Parallel SCSI, 36.4 GB, OK)
physicaldrive 2:1 (port 2:id 1 , Parallel SCSI, 36.4 GB, OK)
physicaldrive 2:2 (port 2:id 2 , Parallel SCSI, 36.4 GB, OK)
physicaldrive 2:3 (port 2:id 3 , Parallel SCSI, 36.4 GB, OK)
physicaldrive 2:4 (port 2:id 4 , Parallel SCSI, 36.4 GB, OK)
physicaldrive 2:5 (port 2:id 5 , Parallel SCSI, 36.4 GB, OK)

=>
Smart Array 5i in Slot 0
array A
logicaldrive 1 (169.6 GB, RAID 5, Ready for recovery)

[SPa]

Post the ADU report.That should give some clue.

[Arto Saraniva]

Please find it attached.

[SPa]

The ADU report shows the Drive at Port 2 SCSI ID 5 has lot many errors and this looks to be the fault of the logical drive not rebuilding.

I would prefer taking a complete backup,replace drive and recreate.

Also the firmware for the drive needs an update.

[Marek Nelec]

Actually the errors might logged by the drive with SCSI ID 5 _because_ of outdated firmware (which may be bugged). Also the controller firmware itself needs an upgrade to, he current version is 2.62.

[SPa]

Yes,Should try update the firmware for the drive and controller first and then check