SCSI Time out ! Eventid : 9

[Ayman Altounji]

After installing the latest SSD with the cpq32fs2.sys I still experience system lockups when my backup is running.

Suggestions ?

Greetings
Eric van Engelen (evengelen@cnn.nl)

[Ron Amos]

If you have no Hard drives connected to your Imbedded Controller.

Suggest booting Server to "F10" run "System Configuration" Then "Configure Hardware" Then "View or Edit Details" -- Page down near the bottom -- High light SCSI BUS Speed for Imbedded SCSI Port #2 -- Press "Enter" -- Change to "SCSI 1 Compliant" -- Press F10 to save -- then save and exit -- This will set SCSI BUS Speed without delays that occur with "Auto" selected

This and also be done with System Configuration run from diskette if you do not have a System Partition -- For additional help call (800) OKCOMPaq (800) 652-6672

Hope this helps,