SCSI & SATA Boot Coltroller Order ML330

[DataB]

I have a ML330 G3 with a single channel SCSI card. I have recently added a Silicon Image SATA card.

Regardless of the boot order in the BIOS the ML will always attempt to boot from the SATA drive which does not have the OS on it.

The SATA ROM BIOS appears before the SCSI ROM BIOS upon boot regardless of the PCI slot the cards occupy (if this is relavant).

Unplug the SATA drive & the server boots from SCSI as normal.

Does anybody know if I can make the ML boot from the SCSI with the SATA card & drive attached?