HPE Community
ProLiant Servers (ML,DL,SL)
1755930 Members
3096 Online
108839 Solutions
New Discussion

Smart Array 5i Controller

 
SOLVED
Go to solution
Brian_470
Occasional Advisor

‎06-06-2006 07:05 AM

‎06-06-2006 07:05 AM

Smart Array 5i Controller

I have several DL380G2's that are all having the same symptoms. I will reboot the server and when is coming back up the 5i controller will not get recognized. Therefore I cannot boot. Sometimes if I take the card out and re-seat it that will work but not very often.

Is there a known problem with cards? It has all the latest firmware, etc.
0 Kudos
Reply
1 REPLY 1
Steven Clementi
Honored Contributor

‎06-06-2006 07:19 AM

‎06-06-2006 07:19 AM

Solution

Re: Smart Array 5i Controller

Brian:

I have experienced similar behavior on a few of the Dl380G2's I had been in control of several months ago.

My best suggestion is to check to see if the servers are under warranty and if so, have the controller replaced. If not, well... it all depends on how much money you are willing to spend.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.