T1000 / T1500 - Auto power on UPS after failure

[Sam_Lees]

Hi All

Our customer reports that an older T1000 UPS does not power on once power is restored and needs to be manually powered on.

Can anyone advise if this is still an issue with the T1000 G3 or any other models. Such as the T1500 G3 (AF451A) ?

Regards
Sam

[Brian Vo]

Hi Sam,

Lots of time, the issue can be resolved by upgrade the UPS FW. Link:

https://support.hpe.com/hpesc/public/km/search#q=T1000%20%2F%20T1500%20&t=DriversandSoftware&sort=relevancy&layout=table&numberOfResults=25

Make sure the "old" UPS is T1000 or T1000 G2.
There is no similar problem with G3 models

Brian

[Moderator edit: Updated the broken link.]

[thmacshpp]

Hi

I have a UPS T1500 INTL-G1 that has the same problem as above "Auto power on UPS after failure"

Please guide how to fix it.

The above link no longer exists.

Thank you!

[Sunitha_Mod]

Hello @thmacshpp, 

Thank you for writing to us! We would recommend you create a new topic using the create "New Discussion" button, so the experts can check and assist you in resolving the issue. 

Also, we have updated the above link. However, you may also refer HPE Support Center for more information. 

[thmacshpp]

Thank you!