Unknown Device with Server 2008 R2 on ML115 G5

[David Grant UK]

The Hardware ID is ACPI/HPI0002

I've tried the cp008632.exe driver but it complains with 'OS not supported'

Anyone else have a resolution to this?

Thanks in advance.

[Zygmunt Krawczyk]

Install the driver

HP NC-Series Broadcom 1Gb Driver for Windows Server 2008 x64 Editions cp013024.exe

It is available from

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3683705&prodNameId=3683706&swEnvOID=4064&swLang=8&mode=2&taskId=135&swItem=MTX-76de019acc5e4b439e8ee50771

[Murali_V]

Hi David, also refer:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01442875

Regards,
Murali Mohan

[David Grant UK]

I installed cp013024.exe. This was a HP network driver, it didn't remove the 'Unknown Device'.

Murali, I had a look at the article you mentioned. So the 'HP NULL Management/IPMI Controller Driver' is not available for Server 2008 R2?

Thanks.

[Murali_V]

Visit the following URL for HP ProLiant 100 Series Servers Null Management INF Installer Smart Component for Microsoft Windows Server 2003/2008 x64 edition:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3683705&prodNameId=3683706&swEnvOID=4024&swLang=8&mode=2&taskId=135&swItem=MTX-7f558f639c634cbdaf3bdf09d1

[Murali_V · Accepted solution]

If that does not help, Try the following customer advisory:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c02037043

This should resolve the issue.

[David Grant UK]

Thanks Mohan, that resolved the problem!

[David Grant UK]

Problem resolved

[Murali_V]

You are welcome, David.
I am glad to know that the issue resolved.