ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

hpasmcli, both powersupplies OK, but redundant says No ?

SOLVED
Go to solution
mmfpbw
Advisor

hpasmcli, both powersupplies OK, but redundant says No ?

Hi,

 

we have a server that is controlled by hpasmcli. The diagnostic shows that both PSU are OK but the redundant mode says No. How can that happen ? 

 

Many thanks.

 

Cheers

Matthias

 

 

 

knut:~ # hpasmcli
HP management CLI for Linux (v2.0)
Copyright 2008 Hewlett-Packard Development Group, L.P.

--------------------------------------------------------------------------
NOTE: Some hpasmcli commands may not be supported on all Proliant servers.
Type 'help' to get a list of all top level commands.
--------------------------------------------------------------------------
hpasmcli> SHOW POWERSUPPLY
Power supply #1
        Present : Yes
        Redundant: No
        Condition: Ok
        Hotplug : Supported
        Power : 40 Watts
Power supply #2
        Present : Yes
        Redundant: No
        Condition: Ok
        Hotplug : Supported
        Power : 35 Watts
hpasmcli> quit
knut:~ #

2 REPLIES
Suman_1978
HPE Pro

Re: hpasmcli, both powersupplies OK, but redundant says No ?

Hi,

 

It depends on the Server model, what is the server model on which this command was run?

If you see the Wattage, its different for both the PSU.

 

For big servers like DL580 G7, the minimum required power supplies are two and for redundancy, four PSU is required.

Check the server model and its Power Requirements.

 

 

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

Self Solve Options for ProLiant Servers

mmfpbw
Advisor
Solution

Re: hpasmcli, both powersupplies OK, but redundant says No ?

Hi Suman,

 

thanks for the explantation.

 

cheers 

Matthias