ml350 no hard disk found

[peter_367]

Hi,

I recently upgraded my proliant ml350 g3 server to win2k3 from winnt4 for testing purposes.

Now i would like to install back winnt and get rid of win2k3.The problem is when i boot from the winnt cd, it loads all the drivers, then there is an error saying no hard disk drives were detected.

I tried installing additional scsi drivers but the same problem occurs.

Hope you guys can help..

Thanks

Peter

[Prashant (I am Back)]

HI,

THE SERVER IS SHIPPED WITH
Model dependent:

* Integrated Dual Channel Wide Ultra3 SCSI Ultra160/320 Controller
* Smart Array 641 PCI-X controller (3.06GHz models) or
* Smart Array 532 PCI array controller installed on Array models (older models)

Which one we are using or check the driver again from site to do manuual installation
http://h18007.www1.hp.com/support/files/server/us/index.html


Regards,
Prashant S.

[peter_367]

I checked the scsi and raid controllers in the device managers, it has scsi ultra3 and array 532 contollers

[Stephen Kebbell]

Hi Peter,

you need to press F6 when you first see the blue background for NT setup.
Get the driver and exact instructions here:
http://h18023.www1.hp.com/support/files/server/us/download/19093.html

Regards,
Stephen