proliant dl380 server accessing the bios

[jason_468]

i got a proliant dl380r01 server pIII 667mhz i am trying to access the bios i need it to boot from cd. i have tried everything F10 F9 F8 i even booted it and pressed almost every button and still will not go into bios. it does not say what to press to enter setup or anything on the post screen. anyone konw how i can get into the bios on this server.

[Oleg Koroz]

if SCU not Installed you can't get access to F10, F10 it only gate to small Partition on the HDD, where all info Stored, or it could be stored in NVRAM
pick SS CD 5.5 or CSU and Firmware for Array if different than Integrated used SS CD
http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=953940

[jason_468]

i just downloaded the ss 5.5 iso and made a cd it still wont boot that. i put it in start up the computer and nothing it goes to the hard drive raid thing it found 1 drive. then it says press F1 to continou or F10 for system partion setup. i press F1 nothing happens i press F10 nothing happens. about 30 secons later it say sno system disk error thing.

[Prashant (I am Back)]

Hi,

try this
http://h18023.www1.hp.com/support/files/server/us/download/13227.html
It will do last not least

regards,
Prashant S.