HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP PSP 8.30 and Network utility

 
Zeljko Muza
Occasional Advisor

HP PSP 8.30 and Network utility

Hi,

I tried toady installing HP PSP 8.30 on my Windows 2008 R2 host. All drivers are installed successfully but HP Network utility isn’t installed.
I tried to manually install HP Network utility 9.70.0.0. but installation says that OS is not supported.
Is this error of HP site or some thing else?

Thanks in advance

Zeljko
2 REPLIES
Dave.
Valued Contributor

Re: HP PSP 8.30 and Network utility

Have you got the right version? Did you pull the PSP from the ProLiant's support site?
To do this do:
http://www.hp.com/
-> Support and drivers
Click Download drivers and software (and firmware)
enter ProLiant Model e.g. DL380 G6
and click GO
This may take you to a list of models, click the most suitable
Then select the operating system
Microsoft Windows Server 2008 R2
Then Click Software - Support Pack
And click the subject to get to the details and download page. Review the tabs to get the full background on the PSP
Hope this helps, Dave.
Regards, Dave
Zeljko Muza
Occasional Advisor

Re: HP PSP 8.30 and Network utility

Hi,

I have same problem. I think that HP put wrong version on site. I try to upgrade my 2008 Server that is not R2 and same problem.