Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

Updating Network settings on ILO

Occasional Visitor

Updating Network settings on ILO

When i'm trying to update the ilo settings using cpqlocfg i receive the log error in attatch,the xml seems to be correct.Anyone can help me???????

2 REPLIES
Honored Contributor

Re: Updating Network settings on ILO

The error is kind of generic:
IP Address is: omephysical.srv.tv.pre
SIO_connect failure.
CPQLOCFG.EXE: ERROR: SIO_connect:reason(10061).

Suggestions:
- try to PING the address omephysical.srv.tv.pre
- try to run CPQLOCFG using the IP address instead of DNS name
- you should be using CPQLOCFG against the iLO (address), not the host; this point is unclear in the post.
- log into the iLO and check that the https port is 443 (the default used by CPQLOCFG)
Occasional Visitor

Re: Updating Network settings on ILO

Ok thks i solve the problem its about a incorect dns resolution!
//Add this to "OnDomLoad" event