How to restore Network options under the Security -> Access Settings to enable media

[Matthew Murdock]

Picked up a DL360 G10 Server with 64gb ram single processor, but as I go into the ILO under the Security Access Settings, there is no Network options to enable the virutal media. Would a Lifecycle Managment __> Decommission be warranted at this point or is there some cli level  command that can be ran to get things to appear again?

[Suman_1978]

Hi,

Have you tried to Reset iLO to factory defaults?
Resetting iLO 5 to factory defaults

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00030079en_us
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00026113en_us

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

[Matthew Murdock · Accepted solution]

Thanks. I actually had to go through intelligent provisioning and did a secure wipe and reload of system defaults. then it came back. 

[Sunitha_Mod]

Hello @Matthew Murdock, 

Perfect! Glad to know the problem has been resolved.