Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO 4 IPv6 Support

 
Occasional Advisor

ILO 4 IPv6 Support

Hi,

I have a DL360e G8 running ILO 4 2.75 (newest Version available) and need to configure a static IPv6 Adress. I've entered it in the settings (Network --> Dedicated Port --> IPv6). I've also entered the static default gateway, but it doesn't look like ilo is using it. From a System on the same Network I can access ilo, but need to access it via Internet.

4 REPLIES 4
HPE Pro

Re: ILO 4 IPv6 Support

Hello,

I hope the below documents will help you.

HPE Integrated Lights Out (iLO 4) - Configuring IPv6 Settings

https://support.hpe.com/hpesc/public/docDisplay?docId=a00045464en_us&docLocale=en_US#:~:text=iLO%20features%20that%20support%20IPv6,of%20the%20IPv4%20address%20pool.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,


I am a HPE Employee

Accept or Kudo

Occasional Advisor

Re: ILO 4 IPv6 Support

I've already seen this page and HP writes there also as supportet Features
static Addresses. I've researched in the meanwhile a bit more, the IP
address is assigned, but ilo doesn't use the gateway I've entered.
HPE Pro

Re: ILO 4 IPv6 Support

Hello,

I would suggest you to have a proper case be logged with HPE, and share the appropriate logs for further analysis.

Regards,


I am a HPE Employee

Accept or Kudo

Occasional Advisor

Re: ILO 4 IPv6 Support

I tried opening a case on the HPE support page, but after entering my SN I
get a empty page which a button to select one of my products with warranty
(I don't have one).



Jonas