Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

RILOE II errors after firmware upgrade to 1.20

saserver
Occasional Visitor

RILOE II errors after firmware upgrade to 1.20

From the RILOE II host server HP System Mgmt,
it is reported that the NVRAM Write/Read/Verify failed the self test.

Beside that, the event log for the host server also reported RILOE II error '256' , SNMP Trap :9005 in CPQSM2.MIB.

The firmware version currently use is version 1.20 and with this attachment are the screen captures for the error.
2 REPLIES
acartes
Honored Contributor

Re: RILOE II errors after firmware upgrade to 1.20

This problem and solution is discussed in another thread, here:
http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1006583

I believe it is a one-time upgrade hiccup that has had an advisory issued in the past. It can be cleared by resetting the RILOE board from the sysem management home page.
Oscar A. Perez
Honored Contributor

Re: RILOE II errors after firmware upgrade to 1.20

There is a customer advisory explaining this error but for the RILOE-1 card:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_ES040421_CW01

Looks like this is a one time error because something changed in the NVRAM between versions. Try resetting the RILOE-II card and let us know if you still get the error.



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!