Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Server Management - Remote Server Management
Showing results for 
Search instead for 
Did you mean: 

cpqlocfg error

Karl Sarkozi
Occasional Visitor

cpqlocfg error

I am getting the following error when I try to change some network settings:

IP Address is:
cpqlocfg: ERROR: SSL_write:Connection Terminated:reason(0).

Is it necessary to have a network connection to the RIB itself to do this? I was able yo update the firmware using the XML script, but I specified the IP address of the server, not the name or IP address of the RIB itself. I had a network connection to the RIB on that occasion.
barnett chan
Trusted Contributor

Re: cpqlocfg error

Cpqlocfg utility should use the iP or DNS name of the Lights Out device (RILOE/iLO), and not the ip of the server.