Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

possible to import ssh keys to iLO (1) using hponcfg?

mr_scatter
Occasional Contributor

possible to import ssh keys to iLO (1) using hponcfg?

It works with iLO2/3/4, however the same xml file returns an error with iLO(1).

 

server# hponcfg -f import.ssh.key.xml
HP Lights-Out Online Configuration utility
Version 4.0.0 Date 12/08/2011 (c) Hewlett-Packard Company, 2011
Firmware Revision = 1.92 Device type = iLO Driver name = hpilo
</-- ERROR : STATUS= 0x0001
MESSAGE= Syntax error: Line #3: syntax error near "" in the line: "IMPORT_SSH_KEY>" -->
Script failed

 

It seems that it does not understand the command IMPORT_SSH_KEY.

 

However, adding the ssh key via https works.

 

Everything else pretty much works for iLO(1) other than IMPORT_SSH_KEY.

 

 

1 REPLY
Oscar A. Perez
Honored Contributor

Re: possible to import ssh keys to iLO (1) using hponcfg?

iLO-1 never supported that RIBCL command.




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!