HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
Showing results for 
Search instead for 
Did you mean: 

EVA 4000 hardware problems

Eric Lambert
Occasional Contributor

EVA 4000 hardware problems


I have problems getting failed hardware on my EVA 4000.

I configured the SMI-S on my CommandView EVA server. Then, I added the CEVA server to my SIM. I see the SAN and I'm getting data collection, health, etc. I need to configure SIM to receive emails when the health changes. Currently, I have a failed disk. The health is Minor with a yellow logo.

I configure tasks based on the events for all my servers. SIM isnt getting any events when health changes...

Any idea how I can receive emails when I have hardware problems with the SAN?


Rob Buxton
Honored Contributor

Re: EVA 4000 hardware problems

You need to set up the tools that come with the EVA for that.
Have a look at WEBES.
Also depending on what support you have you may be able to use ISEE.