HP SIM 5.2 Not Reconizing ESX4.0U1 hosts

[pingu_the_penguin]

Hi All,

I have just rebuilt our ESX hosts to 4.0U1 using HP Insight deployment however they HP SIM does not seem to able to understand the hosts. The systems management page opens perfectly and we have use the same hpmgmt.conf, only difference is the OS changes from ESX 3.5 to 4.0U1 and management agents have moved to 8.40. From the SIM server I can open the management page on the hosts without any issue and it does not ask me for credientials so authentication is working. I am guessing it is something to do with MIB, I have installed the MIB form the following link http://h18000.www1.hp.com/products/servers/management/hpsim/mibkit.html how do i check it installed correctly?

an output is listed below from indentify system:-
Starting identification process...
Checking for known running web servers.
Checking for System Management Home Page and other HP web agents.
Received a response from the system management homepage on the SSL port, this system supports SMH.
Checking for WBEM support on system.
Running WBEM rules based identification.
Cannot get ComputerSystem WBEM/WMI data from the system
Running VM Identification
The system is not a VMware ESX Host, or WBEM credentials may not be specified, skipping VM Identification
Running WS-Man identification.
The system did not respond to WS-Management, verify credentials.
Checking for SNMP support on system.
The system responded to a SNMP request, it supports SNMP.
Running SNMP base Cluster identification using common cluster MIB.
This was not a system with the common cluster MIBs supported.
Running HP ProLiant management agent identification
System does not have the SNMP ProLiant Server (foundation) agents installed.
Running HP NetServer identification.
System supports the NetServer SNMP agent, adding system type
Running HP-UX SNMP identification.
System does not have the HPUX SNMP agents installed.
Running SNMP System Type Manager identification.
Found matching SNMP System Type Manager rule, added as possible system type
Checking for DMI protocol support.
The Windows CMS cannot communicate with HP-UX or other DMI, skipping.
Running DMI System Type Manager identification.
The system does not have Windows DMI support.
Running HP-UX DMI identification.
The system does not have HP-UX DMI support.
Running HP/Compaq Desktop identification.
The system does not have Windows DMI support.
Running HP DMI Desktop identification.
The system does not have HP DMI Desktop support.
Running Generic DMI identification.
The system does not have Generic DMI support.
Checking for SSH protocol support.
The SSH protocol is not supported on this system
Running Storage identification.
Did not detect WBEM support on this system. Will not attempt storage identification. If this is a storage host, check WBEM credentials and make sure the providers and CIMOM are operational on the host.
Storage identification completed.
Running HP Service Guard Identification.
The system is not part of HP Service Guard cluster
Checking if this system is supported by Insight Power Manager.
Insight Power Manager is not supported.
Running VM identification.
VMM Integration is not enabled, skipping VM Identification
Building system relationships.
Running limited data collection for common attribute.
Done with limited data collection, checking retrieved data.
SMH trust status is true.
Running node communication diagnosis
System identification done with this system.