HP SIM (Windows) and PMP with BL460c... Unsupported Configuration

[David Fernandez Vaamond]

Hi

I'm using HP SIM 5.1 (windows 2003 SP 1) with PMP 4.1.

I've tried to use one license of PMP (from 5 free licenses) with a BL460c G1 with a Red Hat 4 Update 4 AS x86_64 and PSP 7.70.

When I try to configure PMP, HP SIM show "unsupported configuration" when I select a machine with a deployed licensed in and go to Options -> PMP Options -> Configure.


Does anybody know what is the problem with this configuration? (I've checked support matri x and this configuration is supported...).

Thanks in advance

Regards, David

[Rob Buxton]

At a guess the version of PMP is too old to support that hardware.
PMP 4.1 is quite old you may need to get hold of PMP 4.6 which I believe is the latest available for HPSIM 5.1. That version of PMP will support the BL460c I believe.

[David Fernandez Vaamond]

Thank you Bob. I'm going to try to update this PMP versión and try again.

Regards, David

[Christopher Younger]

I dunno... I get this even with 4.7 using new BL460c.

I was hoping there was an easy fix for this problem. :)

[Carolyn_8]

I got this to work with PMP4.7, managed node is RHEL4u6 on bl460c. But still can't get it to work for RHEL5u1 x86_64 on bl460c. Listed as supported in the support matrix so it is supposed to work... Tried changing the system parameters using mxnode -m just to see if PMP would let me configure it but the OS name and version attributes I change don't seem to stay for more than a moment. They are reset shortly after I modify them.