Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Monitoring Server Disk thresholds

Andrew Bolton
Occasional Contributor

Monitoring Server Disk thresholds

I have set Disk thresholds, and know that there are a couple of server which are beyond the thresholds i hace set, however, when i view the tasks results, nothing appears. i have a message in the stdout

"StdoutStderr Could not set the disk threshold, the agent did not accept the request."

What agent needs to be running on the server? how do i get this working?

Thanks in advance

Andy Bolton
3 REPLIES
Andrew Bolton
Occasional Contributor

Re: Monitoring Server Disk thresholds

I have now got some servers responding with successful application of the thresholds and i am getting email notification about this, i am unsure as to why the others are not getting applied.

They are all HP Proliant Servers, what else needs to be added to the server to enable this?

Andy Bolton
Craig McK
Trusted Contributor

Re: Monitoring Server Disk thresholds

Hi Andy,

Just to check:
- Do you have SNMP Sets enabled or disabled on the problem servers
- Is there a read/write or read/create community defined?

Andrew Bolton
Occasional Contributor

Re: Monitoring Server Disk thresholds

I have Set these on the servers that are now responding, but i am unsure what needs to be installed to allow those to happen, as this agent or facility was already installed, just needed configuring.


Thanks

Andy