Servers - General
1757107 Members
2101 Online
108858 Solutions
New Discussion юеВ

Max Raid Size Raid5 on G10

 
karlmuy
Occasional Visitor

Max Raid Size Raid5 on G10

Hello all,

I build a Raid 5 with 8*4TB SSDs on G10 DL 380 (Controller 816) succesfully. -> 25TB

But while filling the Raid with data by rsync. the System (Ubuntu 18.04) stuck and I had to Cold Boot.

Is there a limit on Disks / Raid or have I do special commands on gdisk oder mkfs.ext4

thanks in advance

2 REPLIES 2
karlmuy
Occasional Visitor

Re: Max Raid Size Raid5 on G10

Hello All,

may be I was a little bit nervous about the crash.

The reason maybe was that, the Raid 5 was not initilized enough. I created the Raid and within minutes I started Rsync.

  So after two minutes the Server crashed. Today sync is ongoing.Hopefully finished in two days.

In case of a second crash I will post again.

Gerd

 

 

ksram
HPE Pro

Re: Max Raid Size Raid5 on G10

Hi,

Thank you for the Post.

If any issues seen on the Storage end, it could be cos of the Array Controller and or Drive firmware.

Would request you to check and update the Array Controller Firmware version to 3.00 or above.

(In Gen 10 Server Array Controller firmware version 2.65 and previous versions were having issues and been removed from the Site.)

Thank you

Ramkumar K S


I work for HPE.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo