HPE Community
MSA Storage
1757087 Members
1877 Online
108858 Solutions
New Discussion юеВ

Re: MSA Device Discovery Tool

 
John64
Collector

тАО08-02-2011 09:47 AM

тАО08-02-2011 09:47 AM

MSA Device Discovery Tool

Hi All,

 

Has anyone used this successfully to perform an inband msa configuration?

 

I can discover the device Controller  A and B, they have the default IP addresses 10.0.0.2 & 10.0.0.3

 

I try to create a virtual nic which sets my nic to 10.0.0.10 - then i enter the new IP, subnet & gateway - click ok and nothing happens - the NIC's don't change.

 

What am i missing here?

 

thanks

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО08-02-2011 10:38 AM

тАО08-02-2011 10:38 AM

Re: MSA Device Discovery Tool

I usually set the IP on new systems via a serial connection by a CLI command.

 

How exactly did you set the IP address (CLI, SMU, ...)?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Johan Guldmyr
Honored Contributor

тАО08-02-2011 10:49 PM

тАО08-02-2011 10:49 PM

Re: MSA Device Discovery Tool

Hello,

this virtual nic - is this in windows 2008 - in a virtual machine or something? If you're on 10.0.0.10 you do not need a gateway. Do you not have something else for example a laptop that you can connect and set the physical nic to 10.0.0.x?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.