Storage Software
cancel
Showing results for 
Search instead for 
Did you mean: 

Commanf View Eva, SSSU and Systems Homepage 2

 
Joerg Fischer
Valued Contributor

Commanf View Eva, SSSU and Systems Homepage 2

Hi
How can help? I have an EVA5000. For the Management I use a DL360 with WIN2003. I have install Commandview EVA 4.1, SSSU, and Systems Management Homepage 2. I can start the commandview from the Menu of the management homepage. But if I would like to register with SSSU, I get the message: Username and password invalid. I set the password with "ElmSetup -pA:thepassword -f" and the SSSU works fine. But then, I can register no more at command view Eva. I reinstall Management Homepage and the SSSU work no more.

Joerg

4 REPLIES
Uwe Zessin
Honored Contributor

Re: Commanf View Eva, SSSU and Systems Homepage 2

When I tried this I had the same result - a reboot of the management server after "elmsetup" fixed it for me.
.
Frantisek Kysela
Valued Contributor

Re: Commanf View Eva, SSSU and Systems Homepage 2

Hi,
reboot isn't required. Adeguate action is restart HSV element manager service after elmsetup.

Frantisek
If anything just cannot go wrong, it will anyway.
Uwe Zessin
Honored Contributor

Re: Commanf View Eva, SSSU and Systems Homepage 2

Frantisek, I know that is what the manual claims, but I assure you that a simple restart of the "HP Command View EVA" service did not enable full functionality for me. I could work with SSSU, but no longer access the CV GUI.
.
Bill Costigan
Honored Contributor

Re: Commanf View Eva, SSSU and Systems Homepage 2

Just to confirm Uwe's statement. I just had the same problem. After running elmsetup, sssu worked and the CV GUI did not. I restarted the service a number of times. And then searched the forums for a solution. Found this thread, rebooted and all is well.

Thank you Uwe.