DLT1 Windows 2003 Server and System Backup

[CA1072802]

I get an Command Error at the last stage of backup, I beleive when is is saving the system infomation.
Error: The device reported an error on a request to write data to media.
Error reported: Invalid command.
There may be a hardware or media problem.
Please check the system event log for relevant failures.
The operation was ended.
Backup completed on 1/12/2004 at 3:12 PM.
Directories: 198
Files: 2698
Bytes: 516,312,101
Time: 1 minute and 52 seconds

[CA713937]

Use the administrative tools -> event viewer to review the system logs, and see what messages were logged at the time of the backup.

You can also install HP library & tape tools (www.hp.com/support/tapetools) and generate a support ticket (select device, select support tool, save support ticket to file) and post it here - we can see if the drive logged any errors. However, if the drive rejected a command from the host it usually it not logged.

[CA1072802]

The system Event Log displays the same error that was in the backup log file.
Thanks for your reply.

[CA713937]

OK, guess that doesn't help much. Generate a support ticket and let's look there.

You could also run the read/write test in LTT on that piece of media, although it sounds more like a software error (invalid command).