StoreVirtual VSA 2-Nodes+FOM with Direct Attached iSCSI is supported ?

[JulianBlu]

1. With StoreVirtual VSA 12.5+ is it supported to setup a 2-Nodes+FOM Cluster running on vSphere with direct attached ethernet cables between the 2 nodes for iSCSI Traffic only ?
   Example: 2 Proliant with 2 * 1Gbe /10Gbe ports, each port directly connected to the same port on other node, without switches.
   LeftHandOs and Management traffic will be configured to use the second VSA eth interface, and that interface will be connected to a vSwitch and a physical switch and be able to communicate with the FOM.
   
   
2. If this scenario is allowed, how many iSCSI logical subnets should be configured ?
   
   
3. How should be configured the Teaming options in the vSphere vSwitch dedicated to iSCSI ?

Thank you,
best regards.

Julian B.

[HPstorageTom]

A configuration with direct attached iSCSI is not support for the VSA.