Accessing a stack commander without an IP?

[Preston Gallwas]

Scenario: I wanted to swap the IP address for managmenet from VLAN1 to VLAN2.

Untagged 1-26 to VLAN2 (2626B / 8.60 firmware)
Lost comm

It still appears to work, however, the commander shows down from the member switches

Is there a way to use the members to conncet to the stack commander?

yikes :) i dont want to drive out there!

[Manfred Arndt]

Ooops...you could try and get someone at the site to connect via the serial port and walk them through the configuration.

[Regnar Bang Lyngsø_2]

Some days you really miss the Cisco IOS delayed reload.

[Preston Gallwas]

...no one out there can console in (teachers dont have those cables here hehe)