HPE Community
Switches, Hubs, and Modems
1754061 Members
3505 Online
108811 Solutions
New Discussion

SYSLOG sttings at hp2848 (J4904A)

 
Christoph Trepper
New Member

‎06-09-2005 01:57 AM

‎06-09-2005 01:57 AM

SYSLOG sttings at hp2848 (J4904A)

Hi there!

We're running 3 2848switches.
I want the switches to send their syslog messages to our syslog server.
My problem:
how can I configure the switch to send all syslog messages to the server? or the other way 'round: how can I have the switch send all facilities to the server. user-facility is not enough.
I couldn't find a way to set the debug level from 'event' to 'all' either.

any ideas?

thank you!
0 Kudos
1 REPLY 1
Les Ligetfalvy
Esteemed Contributor

‎06-09-2005 08:57 AM

‎06-09-2005 08:57 AM

Re: SYSLOG sttings at hp2848 (J4904A)

Telnet to the switch and in config mode, enter the command:
logging 10.20.30.40

where the IP is you syslog server

Show debug

will give you the facility which you can change.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.