Operating System - HP-UX
1757004 Members
2005 Online
108858 Solutions
New Discussion

Can not reboot after modified fstab

 
fteng
New Member

Can not reboot after modified fstab

Today I am setting up C3750 internet connection,

During the setting of internet, I have tried to recovery the system by modify “/etc/fstab”,

But after that it shows error

 

INIT Command is respawning to rapidly

Will try again in 5 minutes

Check for possible errors

Id: cons “/usr/sbin/getty console console                #system console

 

And I have try to login single user mode, but the the system did not ask me “ to press any key in 10 sec to stop booting “, directly boot the hard disk, then I can not key in any command.

How can I solve this problem?

2 REPLIES 2
Bill Hassell
Honored Contributor

Re: Can not reboot after modified fstab

The C3750 seems to be a Cisco network switch. Are you askig questions about the switch or about an HP-UX computer? It would really help if you can provide more information about the system you are using.



Bill Hassell, sysadmin
Steven Schweda
Honored Contributor

Re: Can not reboot after modified fstab

> The C3750 seems to be a Cisco network switch. [...]

   It doesn't, if, like me, you own a c3700 workstation.  Literature
seems to be sparse, but there's a clue here:

      http://www8.hp.com/us/en/hp-news/press-release.html?id=170699

      PALO ALTO, Calif., Nov. 18, 2002

      The HP Workstation c3750 and HP Workstation j6750 are powered by
      the latest PA-8700+ processor running at 875 MHz with HP-UX 11.0
      and HP-UX 11i 1.0.

My c3700 runs HP-UX 11.11 (when it runs at all).