HPE Community
Operating System - HP-UX
1757090 Members
1807 Online
108858 Solutions
New Discussion

Re: EMS hardware monitor for msa2312fc

 
SOLVED
Go to solution
J Bartram
Occasional Advisor

‎09-02-2009 06:46 AM

‎09-02-2009 06:46 AM

EMS hardware monitor for msa2312fc

Hi,
Could anyone tell me if an EMS hardware monitor exists on HP-UX 11.23 ia64 for the msa2312fc. I have previously used MSA1000's with msamon and expected an equivalent monitor to be installed for the MSA2312fc.
Regards,
Jason.
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎09-02-2009 07:41 AM

‎09-02-2009 07:41 AM

Solution

Re: EMS hardware monitor for msa2312fc

Like other arrays (EVA etc.) this array is not monitored by hp-ux. You need to configure this other way (alert by snmp/email ...), see

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=uk&taskId=101&prodClassId=-1&contentType=SupportManual&docIndexId=65456&prodTypeId=12169&prodSeriesId=3971478

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.