Operating System - HP-UX
1829152 Members
2354 Online
109986 Solutions
New Discussion

Problems with load hostname an ip adress

 
SOLVED
Go to solution
Edixon Padilla
New Member

Problems with load hostname an ip adress

hi all,

I have this problems with a rp3440 and hpux 11.11, this are the mesagges:


Output from "/sbin/rc2.d/S130pfilboot start":
----------------------------
/sbin/rc2.d/S130pfilboot[5]: Syntax error at line 131 : `"' is not matched.


Output from "/sbin/rc2.d/S131ipfboot start":
----------------------------
/sbin/rc2.d/S131ipfboot[6]: Syntax error at line 131 : `"' is not matched.

Output from "/sbin/rc2.d/S340net start":
----------------------------
/sbin/rc2.d/S340net[134]: Syntax error at line 131 : `"' is not matched.

Output from "/sbin/rc2.d/S370named start":
----------------------------
/sbin/rc2.d/S370named[49]: Syntax error at line 131 : `"' is not matched.


Output from "/sbin/rc2.d/S490mrouted start":
----------------------------
/sbin/rc2.d/S490mrouted[39]: Syntax error at line 131 : `"' is not matched.

Output from "/sbin/rc2.d/S500inetd start":
----------------------------
/sbin/rc2.d/S500inetd[38]: Syntax error at line 131 : `"' is not matched.

Output from "/sbin/rc2.d/S510gated start":
----------------------------
/sbin/rc2.d/S510gated[38]: Syntax error at line 131 : `"' is not matched.

Start router discover protocol daemon
Output from "/sbin/rc2.d/S520rdpd start":
----------------------------
/sbin/rc2.d/S520rdpd[25]: Syntax error at line 131 : `"' is not matched.

Start RARP protocol daemon
Output from "/sbin/rc2.d/S525rarpd start":
----------------------------
/sbin/rc2.d/S525rarpd[37]: Syntax error at line 131 : `"' is not matched.

Start remote system status daemon
Output from "/sbin/rc2.d/S530rwhod start":
----------------------------
/sbin/rc2.d/S530rwhod[39]: Syntax error at line 131 : `"' is not matched.

/sbin/rc2.d/S535inetsvcs[75]: Syntax error at line 131 : `"' is not matched.

Starting mail daemon
Output from "/sbin/rc2.d/S540sendmail start":
----------------------------
/sbin/rc2.d/S540sendmail[37]: Syntax error at line 131 : `"' is not matched.


Output from "/sbin/rc2.d/S550ddfa start":
----------------------------
/sbin/rc2.d/S550ddfa[40]: Syntax error at line 131 : `"' is not matched.

Start SNMP Master Network Management daemon
Output from "/sbin/rc2.d/S560SnmpMaster start":
----------------------------
/sbin/rc2.d/S560SnmpMaster[167]: Syntax error at line 131 : `"' is not matched.

Start OSPF MIB Network Management subAgent
Output from "/sbin/rc2.d/S565OspfMib start":
----------------------------
/sbin/rc2.d/S565OspfMib[74]: Syntax error at line 131 : `"' is not matched.

Start SNMP HP-UNIX Network Management subAgent
Output from "/sbin/rc2.d/S565SnmpHpunix start":
----------------------------
/sbin/rc2.d/S565SnmpHpunix[203]: Syntax error at line 131 : `"' is not matched.

Start SNMP MIB-2 Network Management subAgent
Output from "/sbin/rc2.d/S565SnmpMib2 start":
----------------------------
/sbin/rc2.d/S565SnmpMib2[207]: Syntax error at line 131 : `"' is not matched.

Start SNMP Trap Dest Network Management subAgent
Output from "/sbin/rc2.d/S565SnmpTrpDst start":
----------------------------
/sbin/rc2.d/S565SnmpTrpDst[208]: Syntax error at line 131 : `"' is not matched.

Output from "/sbin/rc2.d/S590Rpcd start":
----------------------------
/sbin/rc2.d/S590Rpcd[30]: Syntax error at line 131 : `"' is not matched.


Output from "/sbin/rc2.d/S600iforls start":
----------------------------
/sbin/rc2.d/S600iforls[34]: Syntax error at line 131 : `"' is not matched.


Start remote boot daemon
Output from "/sbin/rc2.d/S610rbootd start":
----------------------------
/sbin/rc2.d/S610rbootd[40]: Syntax error at line 131 : `"' is not matched.

Start time synchronization
Output from "/sbin/rc2.d/S660xntpd start":
----------------------------
/sbin/rc2.d/S660xntpd[37]: Syntax error at line 131 : `"' is not matched.

Start accounting
Output from "/sbin/rc2.d/S700acct start":
----------------------------
/sbin/rc2.d/S700acct[39]: Syntax error at line 131 : `"' is not matched.

and when the system is ready and execute the command:

#uname -a --->show next
hpux 11.11 unknow

and the interfaces of network not load.

when i execute the command #set_parms
i configured the hostname and ip adress and the server works fine. when i reboot the server, lost the information.

thanks for you help.
5 REPLIES 5
Dennis Handly
Acclaimed Contributor
Solution

Re: Problems with load hostname an ip adress

>/sbin/rc2.d/S130pfilboot[5]: Syntax error at line 131 : `"' is not matched.

You could have a junk file in /etc/rc.config.d/.
Or you have a typo (extra or missing double quote) in one of the config files there. Any file there you changed recently, around line 131?
sahir_1
Frequent Advisor

Re: Problems with load hostname an ip adress

Hi,

Check /etc/rc file. Especially line no:131 in that. I feel you may have to remove one " or ' form that line. Do it after a backup of /etc/rc file in hand.. :-)

All the Best..

Sahir
Edixon Padilla
New Member

Re: Problems with load hostname an ip adress

I will review and then tell you.

Thanks...
Steven E. Protter
Exalted Contributor

Re: Problems with load hostname an ip adress

Shalom,

A quick fix would be to restore the rc file from a working system.

You can't keep duplicates of configuration files in /etc/rc.config.d unless they start with certain characters. Not being able to remember what those characters are, I simply keep copies under development elsewhere.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Bob E Campbell
Honored Contributor

Re: Problems with load hostname an ip adress

A quick check for problems under /sbin/init.d would be to run the command "swverify \*" and look for errors.

If you need clean copies of the files under /etc/rc.config.d look under /usr/newconfig/etc/rc.config.d.

Also run the following snippet:

for X in /sbin/init.d/* /etc/rc.config.d/*
do
sh -n $X
[[ $? -ne 0 ]] && print ERROR: $X
done