BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
System Administration
Showing results for 
Search instead for 
Do you mean 

VA7100 configuration issue

Valued Contributor

VA7100 configuration issue

Hi Everyone,

 

I have a VA7100 that is connected to a rp5470 running HP-UX 11.11

 

The VA7100 has two controllers on it and one of them was bad. I replaced the controller and now I cannot see any of the controllers using cvui. I am not reall good at using armdsp so i am not sure, but it seems that i cannot see any of the controllers that i was seeing before i replaced the bad controller.

 

I am not worried about saving the data on this VA7100 so i can start from scratch but not sure how to do that. Do I need to hook up a serial monitor to the controller port and use the vfp to start over?

 

Also, both controllers have a yellow light on the controller indicator.

 

Any help would be greatly appreciated!

 

Thanks

Tim

1 REPLY
Valued Contributor

Re: VA7100 configuration issue

just an update,

 

I am not at the site that his VA7100 is at so i was trying to do it remotely and had a sysadmin replace the controller. He just informed me that the new controller also has a yellow light next to both of the DIMM's indicator. Not sure how this would affect both controllers but.....