1751709 Members
4938 Online
108781 Solutions
New Discussion

VXVM issue

 
xcvzxvzxdv
Advisor

VXVM issue

I am getting this message can anybosy tell what can i do to resolve it

# vxdctl enable
vxvm:vxdctl: ERROR: vxconfigd is not running, cannot enable
# vxconfigd -k -m enable
vxvm:vxconfigd: ERROR: enable failed: Error in disk group configuration copies
No valid disk found containing disk group; transactions are disabled.
1 REPLY 1
Arunvijai_4
Honored Contributor

Re: VXVM issue

Hi,

Same problem i got yesterday,

First check to see if vxconfigd is running:

# ps -ef | grep vxconfigd

If it is not running, then enter the following to start it:

# vxconfigd

If it is running, then reset it with the following command:

# vxconfigd -k

While trying to start the vxconfigd daemon, it is possible to get error messages like these: cannot open /dev/vx/config or enable volboot file not loaded. In this case, bring up VxVM manually as follows:

# vxiod set 10
# vxconfigd -m disable
# vxdctl init
# vxdctl initdmp (Use this if Dynamic Multi-pathing (DMP) certified arrays are being used.)
# vxdctl enable

-Arun
"A ship in the harbor is safe, but that is not what ships are built for"