HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

level WBEM error occurred: CIM_ERR_FAILED

 
SOLVED
Go to solution
點燃
Valued Contributor

level WBEM error occurred: CIM_ERR_FAILED

Hi all,
We are getting the following error

'MIDB - TBSM ALert (minor) - hpsp1@hpsp1 - [MAN] cnt=1 Log /var/adm/syslog/syslog.log hpsp1 syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_FAILED: A GENERAL ERROR OCCURRED THAT IS NOT COVERED BY A MORE SPECIFIC ERROR CODE'

server model: ia64 hp superdome server SD64A
OS version : B.11.23

Can anyone help?

thanks!
Man's mind, once stretched by a new idea, never regains its original dimensions
3 REPLIES
Torsten.
Acclaimed Contributor

Re: level WBEM error occurred: CIM_ERR_FAILED

The iCOD/iCap software is based on WBEM, I would start to check if all needed providers are installed:

# cimprovider -l -s

Sometimes some are missing/not installed (e.g. nparprovider, etc.); you can get them from http://software.hp.com

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Shinji Teragaito_1
Respected Contributor
Solution

Re: level WBEM error occurred: CIM_ERR_FAILED

Hi,

Can you see one of the following messages in the syslog file ?

http://docs.hp.com/en/B9073-90192/ch02s03.html#v1560033

How ofter can you see the message in syslog ?

Which firmware version are you using ? The following firmware release notes may help you resolv the symptom.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=322822&swItem=ux-66820-1&prodNameId=322820&swEnvOID=2080&swLang=13&taskId=135&mode=4&idx=0

Hope this helps you,

Shinji
點燃
Valued Contributor

Re: level WBEM error occurred: CIM_ERR_FAILED

Thanks all!
Man's mind, once stretched by a new idea, never regains its original dimensions