System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

showing multiple disks for single LUN

showing multiple disks for single LUN

Dear Team,

 

I assigned a LUN from MSA P2000 to HPUX rx2800 servers in 2 node cluster to FC0 and FC1 port of both servers.

after scanning i did "ls -ltr /dev/rdisk" where it showing 4 new disks, which one should i use for LVM.

 

Regards,

Majhar Mujawar

1 REPLY
Torsten.
Acclaimed Contributor

Re: showing multiple disks for single LUN

Since rx2800 runs 11.31 multipath is built-in.

Use the agile device file (/dev/disk/diskxxx) for LVM, each LUN has only 1.

# ioscan -fNCdisk

# ioscan -m dsf


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!