HPE Community
Operating System - HP-UX
1755973 Members
3658 Online
108839 Solutions
New Discussion юеВ

what is lssf command

 
Abubakkar
Frequent Contributor

тАО09-23-2010 02:53 AM

тАО09-23-2010 02:53 AM

what is lssf command

when this command normally using
0 Kudos
Reply
3 REPLIES 3
Horia Chirculescu
Honored Contributor

тАО09-23-2010 02:56 AM

тАО09-23-2010 02:56 AM

Re: what is lssf command

Read the docs:

http://docs.hp.com/en/B2355-90681/lssf.1M.html

Best regards,
Horia.
Best regards from Romania,
Horia.
0 Kudos
Reply
Hakki Aydin Ucar
Honored Contributor

тАО09-23-2010 03:01 AM

тАО09-23-2010 03:01 AM

Re: what is lssf command

Hi,
lssf lists a special file.
used for information about a special file.
for example

if you list the disk with ioscan;
# ioscan -fnCdisk

And pull the raw device like /dev/rdsk/c0t0d0

# lssf /dev/rdsk/c0t0d0

gives the details of device like SCSI LUN etc.
0 Kudos
Reply
SoorajCleris
Honored Contributor

тАО09-23-2010 03:02 AM

тАО09-23-2010 03:02 AM

Re: what is lssf command

Hi ,

lssf is list speical file.
# lssf /dev/dsk/c0t0d0
sdisk card instance 0 SCSI target 0 SCSI LUN 0 section 0 at address 0/0/2/0.0.0.0 /dev/dsk/c0t0d0
[rx26-160]/


check the manpage.

Regards,
Sooraj
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity" - Dennis Ritchie
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.