Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

DAT 160 SAS Internal Tape Drive

Charlie Hawkins2
Frequent Advisor

DAT 160 SAS Internal Tape Drive

RedHat 5.6, I'm currently running the following configuration:

 

Tape drives are running on HP DL380 G7 servers(#589150-001) w/ P212 Controller(#462834-B21) and in an enclosure(3u).  All other tape drives are available, running on Windows 2008, same hardware configuration.  The DAT 160 drive when booting, all lights blink on.  Then they all turn off.  My LTO drives, the lights blink on, then the power light stays on.

Could this be a hardware issue, should the power light stay on after boot like the LTO?

 

Thanks for any info!

 

 

 

Moved from Tape Backup (Small and Medium Business) to Tape Libraries and DriveS

1 REPLY
TapeDrive Killer 1 2
Trusted Contributor

Re: DAT 160 SAS Internal Tape Drive

Looks like a hardware issue but 1st try shuting everything down open up the 3U enclousure then reseat eveything you can reseat you can also try switchiwn the tape drive bay.

Pablo Alv Siles