Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

1810-8g v2 j9802a firmware

MichaelShapiro
Occasional Visitor

1810-8g v2 j9802a firmware

hello , where can i find the latest firmware for j9802a ??

please help

 

 

 

P.S. this thread has been moved  from ProCurve / ProVision-Based to Web and Unmanaged - Hp Forum Moderator

7 REPLIES
Nedal_Abdouni
Occasional Advisor

Re: 1810-8g v2 j9802a firmware

Could it be that it doesn't have any newer firmware else than the factory one?...it's not so "hidden" usually

Richard Brodie_1
Honored Contributor

Re: 1810-8g v2 j9802a firmware

I presume there are no updates released for that model. If you have a specific problem you might be able to get a non-publically available one via support but I guess most of the obvious bugs got shaken out on the v1 hardware.

MichaelShapiro
Occasional Visitor

Re: 1810-8g v2 j9802a firmware

got it , thanks

MelBeckman
Occasional Advisor

Re: 1810-8g v2 j9802a firmware

Sorry, Richardm, but that makes no sense. All HP products have a firmware download page. A user might have to, for example, reload corrupted firmware. So where is the page for the J9802A? When I look up J9802A  in HP support, I am sent to the download for the obsolete J9449A version of the switch, which is faulty as IT DOES'T SUPPORT SPANNING TREE PROTOCOL!!!! which makes it extremely dangerous. I downloaded and read the release notes for the J9449A P.2.10 firmware, but it clearly does not support spanning tree and is thus the incorrect firmware for J9802A.

 

 

Richard Brodie_1
Honored Contributor

Re: 1810-8g v2 j9802a firmware

This product doesn't appear to have a download page. I'm not sure how you got to the old product download page; there's any number of ways to wander around the HP site. I usually start from h17007.www1.hp.com/uk/en/support

 

Here the v2 support page has no download link: http://h17007.www1.hp.com/uk/en/support/converter/index.aspx?productNum=J9802A

 

whereas the v1 does http://h17007.www1.hp.com/uk/en/support/converter/index.aspx?productNum=J9449A

 

I don't think the 1810 models  have a console port, so you would likely be out of luck if the firmware was corrupt.

NathanMulder
Occasional Visitor

Re: 1810-8g v2 j9802a firmware


Richard Brodie_1 wrote:

I presume there are no updates released for that model. If you have a specific problem you might be able to get a non-publically available one via support but I guess most of the obvious bugs got shaken out on the v1 hardware.



The issue is with this is, as a company we have purchased four of these devices with two of them being on different software versions. HP 1810-8G, PL.1.5, eCos-3.0, 1_12_8-customized-h and HP 1810-8G, PL.1.2, eCos-3.0, 1_12_8-customized-h both purchased at the same time.

Richard Brodie_1
Honored Contributor

Re: 1810-8g v2 j9802a firmware

"The issue is with this is, as a company we have purchased four of these devices with two of them being on different software versions."

 

 I didn't say there would NEVER be updates for that model. If you follow the link in my earlier post, you'll find that PL1.5 is now available.