HP 1920G Switch Configuration

[WarNox]

Hi,

I'm trying to configure two HP 1920G switches as per the attached..

• The 3 VLANs should not be able to communicate with each other.
• VLAN 2 and VLAN 3 should be connected by link aggregation between the switches.

Can someone please shed some light on how the various ports should be configured (access, hybrid, trunk, tagged, untagged)? This HP logic isn't working with my Cisco brain :)

Happy to share my config but I've tried so many different permutations that it might be better to just start fresh.

Thanks for any help.

[WarNox · Accepted solution]

After some more mucking about I found out I had to turn off STP because these switches don't seem to do PVST :S