Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

InterVLAN routing on a V1910 series switch

SOLVED
Go to solution
tintix
Visitor

InterVLAN routing on a V1910 series switch

Hi everybody. Got an HP V1910-16G switch (3com 29хх) with IPv4 routing capabilities. After unpacking I did a firmware upgrade to the latest 5.20 Release 1513P06. I did set up additional VLANs (#2 and #3) and VLAN interfaces for those.

The problem is that connected PCs on different VLAN's can't ping each other. Looks like VLAN routing doesn't even work.

Here's my setup:

VLAN ID    VLAN interface
1                10.0.0.21/24
2                10.0.5.1/24
3                10.0.6.1/24

Have one PC connected to VLAN 2 (IP address 10.0.5.2, default gateway 10.0.5.1) and a second PC connected to VLAN 3 (IP address 10.0.6.2, default gateway 10.0.6.1)

Routing table:

Destination IP   Mask                    Next Hop
0.0.0.0       0.0.0.0                       10.0.0.1
10.0.0.0    255.255.255.0       10.0.0.21
10.0.0.21 255.255.255.255  127.0.0.1
10.0.5.0    255.255.255.0       10.0.5.1
10.0.5.1    255.255.255.255 127.0.0.1
10.0.6.0    255.255.255.0       10.0.6.1
10.0.6.1    255.255.255.255 127.0.0.1
127.0.0.0  255.0.0.0                127.0.0.1
127.0.0.1  255.255.255.255 127.0.0.1

The first PC can't ping the second one and vice versa. They only can ping their own gateways and that's all. What I'm doing wrong?

 

 

P.S. This thread has been moved from  LAN Routing to Web and Unmanaged.
-HP Forum Moderator

3 REPLIES
tintix
Visitor
Solution

Re: InterVLAN routing on a V1910 series switch

Solved! I downgraded to the old firmware and the routing works. Shame on HP. Releasing not well tested firmware updates with regressions disappoints me.

Scott Lindner
Occasional Visitor

Re: InterVLAN routing on a V1910 series switch

What firmware version are you running that works?  Have you tried updating to the latest version as of today and does the problem still exist or has it been fixed in the latest release?

 

I have a suspicion it may not actually be a problem but terrible user interface and helper tools.  I'm suspecting the issue may be related to ACLs.

GrumpyOldTech
Occasional Visitor

Re: InterVLAN routing on a V1910 series switch

HP calls that a Solution