HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Showing results for 
Search instead for 
Did you mean: 

ProCurve 1800

Dave Arkfeld

ProCurve 1800

Is PCM the only utility for disabling and enabling ports for test purposes? If so, what are the steps to set that up?



P.S. this thread has been moevd from ProCurve / ProVision-Based to Web and Unmanaged - Hp forum Moderator

Dave Arkfeld
Esteemed Contributor

Re: ProCurve 1800

The ProCurve 1800 is a V-series switch and is managed best through the web interface. My PCM+ install is an older version, and it can't manage the 1800 at all. Newer versions may have some more functionality, but the web interface is your best bet.


P.S. The web-managed switches are not part of E series and really don't belong in this section.
Patrick R
Frequent Advisor

Re: ProCurve 1800

Even the newer version 1810 is also limited ProCurve Manager only discover and map the the 1800 and 1810. SNMP cannot be used to configure them or send SNMP traps to a trap receiver 


See bellow for more details