Networking
Find answers to your questions about Networking.
Wireless
Showing results for 
Search instead for 
Do you mean 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Posted to:
Original author:
It started with that i wondered why the dashboard didn´t show how many clients that were connected to our team between 8 am and 2 pm. I went in to the controller and checked the cpu usage and it showed a very high cpu usage 97-99% /minute The network...
Posted to:
Original author:
Hello i 've a strange problem with 2 setups (seperated networks) 1 with teaming 2 controllers 1 with teamin 4 controllers I used for some devices (laptops) a hidden network. Only on some laptops this hidden network shows up and connect after 2 till 5...
Posted to:
Original author:
We noticed that the recent 6.6.5.0 firmware update raised the 5GHz power levels on our MSM430 APs from 10 dbm up to 12 dbm, calling that a new minimum. Does anyone know the reason for that? (Didn't see anything in the release notes.) We operated the...
Posted to:
Original author:
Hello guys I have a little question for you. I have a customer with 3 MSM760 controllers in teaming. so they are managed with 1 ip address. Now i want to upgrade the software of the controllers. What impact will this have an the ap's connected? Is th...
Posted to:
Original author:
I need to get the wireless devices on an Access controlled VSC communicating with a wired device in the same VSC/subnet. This is a training lab with wireless clients, the VSC has been and working for a year but I now need to add a network server into...
Posted to:
Original author:
We have a Team of 5 MSM765. About a week ago 1 of them had a failed hdd. HP sended me a new one and a new sd-card. I was under the impression it would be just to take out the MSM765, change the parts and re-install the module in the switch. BUT no. W...
Posted to:
Original author:
Problem : Reports of Apple devices no longer being able to connect to WiFi after upgrading software version Controller: MSM 460 Access Points: (majority) HP 430’s and HP 422’s Original software version: 6.0.2.2 New software version: 6.5.1.0 2 VSC's b...
Posted to:
Original author:
When you go to Management -> Management Tool , there is an option for Active Interfaces, and a checkbox for each of the following: LAN Port, Internet Port, and VPN. You'd de-select the Internet Port if you don't want the management web interface t...
Posted to:
Original author:
RSN is a feature of WPA2. When you enable RSN, you will be enabling the WPA2 and after you can select CCMP.
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot ThreadHot Thread
  • Replied-to Thread Replied-to Thread
  • Read Only ThreadRead Only Thread
Events
Nov 29 - Dec 1
London
Discover 2016 London
Learn how to thrive in a world of digital transformation at our biggest event of the year, Discover 2016 London, November 29 - December 1.
Read more
Each Month in 2016
Online
Software Expert Days - 2016
Join us online to talk directly with our Software experts during online Expert Days. Find information here about past, current, and upcoming Expert Da...
Read more
View all
Most Popular
Top Authors